Short answer: A good concert stage SMD screen needs four things: high brightness, a high refresh rate so it looks clean on camera, a pixel pitch that suits the viewing distance, and panels your crew can build fast. At Copenhagen’s Royal Arena, Absen JP5 Pro panels covered all four on a 448 m² backdrop for a five-hour show.
What happened at Royal Arena?
Danish house duo TooManyLeftHands played “TooManyLeftHands & Friends” at Royal Arena in Copenhagen. It was described as the largest DJ set by a Danish artist in the venue’s history, in front of about 16,000 people. Danish AV company Profox supplied a 448 m² LED backdrop built from Absen JP5 Pro rental panels. The stage concept came from Magicbox and Gravity Cph.
The set ran for around five hours without a break, so the screen had to stay stable, bright and colour-accurate from start to finish, both for the crowd and for the cameras.
Which LED panel was used?
The show used the Absen JP5 Pro, part of the JP Pro touring series. Its key specs:
- 5.2 mm pixel pitch
- Up to 5,000 nits brightness
- 16-bit greyscale
- 7,680 Hz refresh rate
- Shipped in an 8-in-1 dolly for quick loading and building
Why does refresh rate matter on stage?
Many concerts and events in Pakistan are now filmed and streamed. A low refresh rate shows up as flicker or black lines on phone and broadcast cameras. A 7,680 Hz panel looks clean on camera, so your client’s videos and live stream look as good as the show itself.
What pixel pitch should you choose for a concert?
Pixel pitch is the distance between two LEDs. A smaller number gives a sharper image up close. For a large arena or an outdoor ground, where most people stand far from the stage, a pitch around 4–6 mm (like the JP5 Pro’s 5.2 mm) gives a sharp picture without paying for fine pitch nobody will notice. For a hotel ballroom or wedding hall, where guests sit closer, look at 2.6–3.9 mm rental LED panels.
What can Pakistani event companies take from this?
- Plan for long shows. Weddings, mehndis, corporate launches and concerts in Pakistan often run for hours. Choose panels made for continuous use, not just short demos.
- Think about the camera. If the event is filmed, refresh rate matters as much as brightness.
- Count build time. Dolly packing and fast locks cut setup time and labour costs on every booking.
- Pick a supplier who answers quickly. Profox’s team said the build and show day went exactly to plan. Local support matters just as much here.
Where can you get Absen stage SMD screens in Pakistan?
Irfan Corporation is the exclusive Absen distributor in Pakistan. The team can help you choose between the JP Pro, PL V3 and other AbsenLive rental series, and support your crew on installation. Contact Absen Pakistan for a quote, or see screens at the experience centre in Islamabad.
FAQ
What size was the SMD screen at Royal Arena?
448 m² of Absen JP5 Pro panels.
How bright is the Absen JP5 Pro?
Up to 5,000 nits, which is bright enough for large indoor arenas and many outdoor events.
Is the JP Pro series available in Pakistan?
Yes. Irfan Corporation supplies Absen JP Pro panels in Pakistan. Contact the team for availability and a quotation.
What is a good refresh rate for a concert SMD screen?
For filmed or streamed events, 3,840 Hz is a common minimum. The JP5 Pro runs at 7,680 Hz.
Related Absen products: Absen JP V2 touring LED panel · Absen VN touring SMD screen · Absen AX Pro MiniLED display