Quick answer: Common cathode vs common anode describes how the LED chips inside each pixel are wired to the driver. The choice changes the driver circuit and the heat, so it matters mostly to the panel’s engineer. Absen AX Pro panels use common cathode technology, but judge any SMD screen by its brightness, colour uniformity, heat test and warranty.
What does common cathode mean?
An SMD pixel holds red, green and blue LED chips. Each chip has an anode and a cathode. In a common cathode layout, the cathodes of the chips in a group are joined together. The driver then controls the anode side of each chip to set its brightness.
The idea is simple, but the details matter in a real panel. The driver chip, the traces on the circuit board and the way current flows all change with the wiring. Absen’s AX Pro product page describes its panel as a common cathode SMD screen.
What does common anode mean?
In a common anode layout, the anodes of the chips in a group are joined together and connected to the supply. The driver then controls the cathode side of each chip, which sets the current and the brightness.
A common anode SMD screen is built the same way in principle, with the anode side shared. Neither layout is a guarantee of quality on its own. A well designed common anode panel can outperform a poorly designed common cathode panel, and the reverse is also true. What counts is how the whole panel is built and tested.
Why does common cathode vs common anode affect the screen?
The wiring decides which parts of the driver carry the current, where the heat builds up and how the brightness is kept even across the panel. Three things change most:
- Driver design: the driver chip is built to control either the anode side or the cathode side, so the two layouts use different driver parts.
- Heat: the current path changes where heat is created on the board. Heat affects colour and brightness over time, so a panel that runs hot can drift faster.
- Uniformity: the way the current is shared across the chips affects how even the brightness looks from one corner to the other.
For this reason, the choice should be checked by the engineer and tested in the factory. A buyer does not need to design the panel, but should know what to ask for.
What does Absen say about common cathode?
Absen’s AX Pro page says its common cathode technology gives higher brightness, better heat efficiency and stronger contrast, and it adds 4K pixel to pixel resolution. These are the supplier’s own claims. Ask for the test report that shows the brightness, the colour uniformity and the temperature under load for the exact model and pitch you plan to buy.
Table: what matters more than the label
| Question | Why it matters | What to ask for |
|---|---|---|
| Brightness at the planned viewing distance | Sets whether the screen reads in daylight | Measured brightness for the exact model |
| Colour uniformity | Shows whether the panel looks even | Uniformity test across sample panels |
| Heat under load | Affects colour drift and lifespan | Temperature test with the panel running |
| Driver and power supply | Affects reliability and running cost | Driver model and the power supply rating |
| Warranty and spare parts | Decides what happens when a module fails | Written warranty terms and spare module supply |
| Service access | Affects repair time | Front or rear service plan for the site |
Does it matter for the buyer?
It matters, but less than most buyers think. A buyer rarely changes the wiring of a panel. The better question is whether the panel has been tested, whether the supplier can show the results, and whether the warranty and spare parts are available in Pakistan. A label that matches the engineering choice will not help if the spare modules take weeks to arrive.
If you compare two quotes, check that both use the same pitch, cabinet size, driver and power supply. Only then does the wiring become a useful point of comparison.
How to read a datasheet
A datasheet can answer most of the wiring questions without a long technical talk. Look for the driver model, the pixel pitch, the cabinet size and the maximum and typical power. Check whether the brightness figure is for a single colour or for full white, because the two can differ a lot. Look for the operating temperature range and the protection rating for outdoor use.
If a figure is missing, ask for it in writing. A supplier that cannot give the driver model or the power figure for the exact model has not shown enough to compare. Keep the datasheet with the quote, so the same model is checked on delivery.
Which points should the quote include?
- The exact model and pixel pitch, with the cabinet size.
- The brightness and colour uniformity test for that model.
- The driver and power supply details, with the rating.
- The warranty terms in writing, including what is covered and for how long.
- The spare module and spare parts plan for Pakistan.
- The service access, front or rear, and the expected repair time.
A quote that lists only the label, without these points, is not enough to compare. Ask for the rest before you decide.
How does this fit the wider screen choice?
For most projects, the pitch, the viewing distance and the service plan decide the screen more than the wiring does. The what is an SMD screen guide explains the basic parts of a screen, and the SMD screen power consumption guide shows how the power and running cost are worked out. Read both before you compare quotes with different technical labels.
Related guides
Related guides: what is an SMD screen and SMD screen power consumption guide.
Frequently asked questions
Neither is better on its own. Each layout suits a different driver design. The panel’s test results, heat performance and warranty tell you more than the label.
Not reliably by looking at it. Ask the supplier for the datasheet or the technical drawing of the exact model, which should show the driver and the wiring.
It can change the SMD screen heat and the power path, so it may affect the running cost. A power saving SMD screen is one that is tested for the power it draws at the brightness you need. Ask for that power test data for the exact model, and use the energy efficient display guide to work out the cost, before you use any saving in a budget.
No. Choose the screen by the viewing distance, the pitch, the test results, the warranty and the service access. Use the layout as one point in the comparison, not the decision.
About this guide: Written by the Absen Pakistan team at Irfan Corporation, the authorised Absen distributor in Pakistan, with offices in Karachi and Islamabad. Product details come from Absen’s official specifications. Last updated: 18 November 2026.